Connect your Scopocket
- Plug the Scopocket into this computer with a USB-C data cable and switch it on.
- Click Connect and choose the Scopocket from the list.
No Scopocket handy? Demo runs a simulated one, with the waveform generator looped back into C1 and an RC filter on C2.
Needs a browser with Web Serial: Chrome or Edge on Windows, macOS, Linux or ChromeOS.
Scroll to zoom, drag to pan, double-click to reset. Drag the yellow line to set the trigger level.
| Freq | Period | Vpp | Min | Max | Mean | RMS | AC RMS | Duty | |
|---|---|---|---|---|---|---|---|---|---|
| C1 | |||||||||
| C2 |
Long capture
Uses the current sample rate and trigger, with up to 200 samples before the trigger. At 100 S/s, 24000 samples is four minutes.
Data logging
Streams every sample continuously, at sample rates up to 50 kS/s. Scroll to zoom, drag to look back, double-click to follow live data again.
C1 C1+ − C1−
C2 C2+ − C2−
Resistance C1+ to GND
Capacitance C1+ to GND
Discharge the capacitor (short its leads) so C1+ is below 0.5 V, then measure. For small capacitors, measure once with nothing connected and press Zero to remove stray capacitance.
| # | Time | Capacitance |
|---|